Wind Generators Tails Towers Fun Stuff for Do-It-Yourselfers About Us E-mail Us!






Page links

SEARCH SITE

HOME PAGE

INDEX OF PRODUCTS AND PAGES

INVERTERS

INVERTER INFORMATION

WIND GENERATORS

SOLAR PANELS AND ACCESSORIES

REGULATORS DIVERSION LOADS AND ACCESSORIES

TOWER PLANS AND SUPPLIES

PARTS TO REPAIR OR BUILD YOUR OWN SYSTEM

SPECIAL BUYS

PLACE ORDER

CUSTOMER SUBMITTED COMMENTS, IDEAS AND PHOTOS

WHAT IS NEEDED TO USE WIND POWER

HOW TO USE WIND POWER

ENERGY SAVING IDEAS

FREQUENTLY ASKED QUESTIONS

ABOUT US

CONTACT US









Mallard 600e

 

MALLARD 800E

 

See our inverters to use with this wind generator to convert the power that you have stored in the battery storage pack in to the 110 volt AC power that you will need in your home, shop or barn. Read information about how to choose the correct inverter. If you are using 12 volt or 24 volt power for your lights and appliances, such as in an RV, you will not need an inverter.

 

Mallard 800E 12 volt without the tail piece $435

By shipping without the tail piece our international customers save money on the shipping cost

Purchase price includes a standard 90 day warranty. Extended warranties of 1 and 2 years are available below

If you live in an area that has a lot of rain, snow or has salt air we recommend having the stator and rotor weather coated  for added protection. For more information on how we do this click here

EXTENDED WARRANTY 

Great price on extra protection for your wind generator.

Warranty must be purchased before we ship your wind generator

1 year extended warranty on 1 Mallard 800E    $30
2 year extended warranty on 1 Mallard 800E    $55

 Mallard 800E 12 volt, no tail piece $435 plus shipping

Price includes complete wind generator. Does NOT include tower, wires, batteries, accessories or shipping. Tower plans are sold separately.

Shipping to lower 48 US state by UPS ground. Shipping to all other areas by USPS Priority Mail

3 coats of weather coating to the stator windings and magnet rotor on 1 PMA $25
800E 12 volt + shipping to the lower 48 US States by UPS Ground ($30) total cost $465
800E 12 volt + shipping to Alaska, Hawaii and the US territories (49.56) total cost $484.65
800E 12 volt + shipping to Canada (62.10) total cost $497.10
800E 12 volt + shipping to much of Europe (112.50) total cost $547.50
800E 12 volt + shipping to Australia (138) total cost $573
800E 12 volt + shipping to some of Africa (149.50) total cost $584.50
800E 12 volt + shipping to some of South America (122.90) total cost $557.90

Any time that you buy more than one item from us and we are able to put them in the same package to save on shipping cost we will refund the difference in the shipping cost back to you.

Mallard 800E - Our most economical Wind Generator priced at an affordable $435. The Mallard 800E has 6 carbon fiber blades with an aerodynamic design. The permanent magnet alternator has a very strong neodymium magnet, specially wound stator, new bearings and has been remanufactured from a GM alternator for maximum performance. Charges batteries in as low as 10 MPH winds. Our wind generators will start out at around 10MPH winds producing around 40 watts. The power will quickly increase as the wind speeds increase. Wind generators are usually rated at peak power which is when the generator will kick out of the wind and will stop producing usable power. However our wind generators are made to stay in the wind and can be used in winds up to 100MPH. So we rate our generators lower than the peak production. They are rated at 40MPH/800watts but they will produce much more than the rated power if the winds are higher.

The Mallard 800E has been "real world" tested at 100 MPH winds by our customers and stands safe and sound. If your batteries are fully charged, our diversion regulators can divert the excess power to a useful load such as a water heating coil. This system has a fixed tail. Our systems are basic and reliable. Less electronic parts mean less to break down. This model has a simple wire tension design so no slip rings are needed. That means there are no slip ring failures. This generator will mount to any 1½" schedule 40 pipe. Be sure to guy wire it well so that your tower does not come down. It is a 59" diameter generator. Even though these blades are made of carbon fiber they are very sharp and can move very quickly in the wind causing severe injury.

To keep costs down our generators now come to you with an UNpainted tail. The tail is made of galvanized steel and should stand up to all weather conditions. It simply won't be red like our pictures show. The frame and PMA will still be painted.

Available in 12 or 24 volt.

As with any wind generator take ALL safety precautions. Only work on putting up your wind generator during low or no winds. Use at your own risk.

Warranty Information

Purchase price of our Mallard 800E includes a 90 day waranty. We have extended warranties of 1 year and 2 years available. If any repairs are needed to your Mallard 800E while under warranty simply send it to us, along with warranty card and a note explaining what the problem is and we will repair it and send it back to you at no charge. Warranty does not cover damage from extreme weather such as huricane or tornado, lightening or damage from something striking the wind generator or the tower falling. Warranty also does not cover if you have taken the PMA apart or modified the wiring.

 

 

 



Mike's Windmill Shop
 
Show Low, Arizona       (928) 532-1607      

Design by: Falcon Marketing & Design, LLC. ©Copyright 2003. All rights reserved. Hosted by White Mountains Online